CHANGE YOUR BATHROOM WITHOUT CHANGING IT! WITH V33 BATHROOM PERFECTION RENOVATION YOU CAN GIVE A NEW LOOK TO WALLS, TILES, AND FURNITURE. EASY, FAST, AND EFFECTIVE!
Dreaming of a completely new bathroom without the expense of renovations? At V33, we can make it a reality with Rinnovare Perfection Bagno , the innovative water-based enamel ideal for renovating any bathroom surface, effortlessly and within everyone's reach.
In fact, thanks to the exclusive Acquaresist® technology – Waterproof Protection, Rinnovare Perfection Bagno guarantees:
- Extreme resistance to continuous jets of water
- High resistance to water temperature changes (10°C/40°C)
- Super resistance to household cleaners
Practical and super convenient to use, V33's Rinnovare Perfection Bathroom enamel is applied directly to the surface, without the use of a primer. It's also easy to maintain, as it can be washed with any everyday detergent.
Product advantages :
- Direct application without bottom
- Waterproof
- Extreme adhesion on surfaces (porcelain, tile, raw and painted wood, melamine, strip)
- High covering power: minimum coverage guaranteed at 98%
- Perfect finish
- Uniform result
- Washable
- Satin look
Need to renovate your bathroom fixtures? V33 Rinnovare Perfection Sanitari is the answer. The one and only single-component water-based enamel that will restore your bathroom fixtures (sinks, bathtubs, shower trays) to their gleaming whiteness. Furthermore, the finish, applied after the enamel, will ensure greater resistance and durability, for perfect bathroom fixtures over time.
Got a renovation project? Share it with us and receive a free Rinnovare Perfection nail polish tester.
Please note: The colors displayed on the site are as accurate as possible. However, we cannot guarantee the same results as colors may vary depending on your screen settings and resolution.
Characteristics
INTENDED USE
Unique enamel ideal for renovating and decorating bathroom walls and shower walls in:
- tiles
- strips
- glass bricks
- plasterboard
- wood paneling.
Warning: Not suitable for horizontal surfaces, shower trays, bathtubs, sinks.
PROPERTY'
- Performance, aesthetics, versatility!
- Extreme resistance to continuous immersion in water.
- High resistance to cleaning detergents for daily care and maintenance.
- High resistance to temperature changes (10°C/40°C).
- Maximum adhesion to supports.
- Easy to apply: directly onto the substrate, without using a primer or stripping paint.
- High coverage power and long-lasting aesthetic result.
Directions for use
PREPARATION
Before application, thoroughly wash the surface with a soda-based (alkaline) cleaner. Any greasy substances will form a film that could cause the paint to fail.
- On rough/porous surfaces (drywall, plaster, wood paneling): dust and apply a primer to the surface before applying the enamel.
- On non-porous surfaces (tiles, wall tiles, strips, glass blocks): wash thoroughly and rinse thoroughly with clean water and apply the enamel directly to the surface. A primer is not necessary.
- On painted surfaces (walls, wooden surfaces): wash well and rinse thoroughly with clean water and leave to dry for 24 hours. Sand with fine sandpaper (240) and remove dust with a clean cloth.
- Do not apply to horizontal surfaces, shower trays, bathtubs, sinks and washbasins.
APPLICATION
- Application conditions between 12° and 25°C, in a place protected from drafts.
- Add the additive found in the tray to the polish and mix thoroughly with a stirrer until the mixture is smooth. Wait 10 minutes and then apply the polish from top to bottom in two generous coats to ensure the polish's performance and a perfect finish. The polish must be used within 10 days to ensure maximum adhesion to the surface.
- Allow to dry completely for 72 hours, without any stress or splashes of water. The bath can be used normally. The enamel reaches its optimum strength only after 20 days of drying: avoid excessive stress on the surface (bumps, stains, scratches, etc.) during this time.
- *The enamel can also be applied with a spray gun, diluted with water between 5% and 10%.
TOOLS
- Wooden wand
- Soft, synthetic bristle brush or spray gun*
- Short-haired enamel roller
SUGGESTIONS
- Paint for internal use only.
- For best results, we recommend applying two coats. For brighter shades, apply a third coat.
- Spread the paint on small surfaces (approximately 1m²), respecting the product's yield.
- Avoid spreading the paint too thinly with rollers and brushes and avoid overloading the tools with too much paint.
- Avoid stopping when you are in the center of your painting surface.
- Do not return to the painted surface while it is drying.
- Wipe the utensils with a clean rag, wash them with water and neutral soap and rinse them thoroughly under running water until there is no trace of paint left.
- For daily cleaning and maintenance of your painted surfaces, use a mild detergent. Do not use abrasive sponges.
